Passive ABY Pedal

Passive ABY PedalThis is an ABY switch which lets you send your input to either the A or B outputs, or to both simultaneously. Please note that passive ABY pedals can be subject to signal and tone loss, as well as ground hum in some set ups. If you want to power the LEDs then you can connect a 9v DC centre negative Boss style adatpor to the pedal's DC socket. The pedal is built with: Aluminium enclosure Neutrik plug sockets 3PDT heavy duty footswitches Status LEDs 2.

Please note the insert loop will not be switchable

This is also a great replacement for the JHS Red Remote and a smaller footprint too

The stubby 30mm high BOP Block risers are 20mm shorter in depth than the standard BOP Blocks

we can most likely add it to our catalogue

1mm centre negative 9v DC socket (60mA)

1mm centre negative 9v DC socket (20mA)

4PDT heavy duty footswitches

Our standard BOP Blocks are flat and (other than the mini

Please note the stereo version uses a footswitch with a mechanical click

The pedal also has a Bypass switch to cut out the selected loop(s) leaving your clean signal

stereo 1/4"

Just add a stereo cable and you are ready to go